Table of Contents
Advertisement
11 WHEELS
The wheelbase length can be adjusted in one or more of the following manners:
• Moving the height adjustment bar forward or back on the frame.
• Moving the caster housing forward or back on frame
Moving the height adjustment bar forward or back on the frame.
WARNING
ALWAYS perform these procedures in the presence of an assistant. The position of the footrest, camber tube, seat angle,
back angle, the tautness of the back upholstery as well as the user's condition are directly related to the wheelchairs
stability. Any change to one or any combination of the five may cause the wheelchair to decrease in stability. Use EXTREME
caution when using a new seating position. The addition of anti-tippers may be required.
1.
Fold the back down. Refer to Unfolding/Folding the Back on page 43.
2.
Remove the rear wheels. Refer to Removing/Installing Rear Wheels on page 66.
3.
Remove the mounting screws and locknuts that secure the height adjustment bar to the frame.
4.
Repeat STEP 3 for remaining height adjustment bar.
5.
Slide height adjustment bars forward or back to the desire mounting location on the frame.
6.
Secure the height adjustment bars to the frame with two mounting screws and locknuts. Tighten securely.
®
Invacare
Top End Reveal
™
Wheelchair
'
72
Part No 1171880
Advertisement
Table of Contents
