Invacare Top End Owner's Operator And Maintenance Manual page 41

iii. Secure the L‐bracket to base frame in the position shown in Detail "D" with mounting screw, two washers,
coved spacer and locknut. Tighten securely.
iv. Proceed to STEP 7.
6. Secure the L‐bracket to the COG bracket in the desired mounting position with two mounting screws and locknuts
(Detail "B"). Tighten securely.
7. Secure the L‐bracket to the COG bracket in the desired mounting position with two mounting screws and locknuts
(Detail "D"). Tighten securely.
8. Repeat STEP 4‐6 for remaining COG bracket.
9. If necessary, install the seat upholstery. Refer to Replacing Adjustable Tension Seat Upholstery on page 50 or Replacing
Screw‐On Seat Upholstery. on page 50.
Seat Rail
Mounting
Screws
Mounting Screw
FIGURE 5.15 Adjusting Center of Gravity - Top End Pro Tennis/ Top End Pro BB
Part No 1122172
DETAIL "A"
COG
Bracket
Locknuts
DETAIL "C"
Coved
Washers
Spacer
Base
Frame
Mounting
Screws
L-Bracket
Locknut
L-Bracket
41
Everyday Series Wheelchairs/Sport Series Wheelchairs
SECTION 5—WHEELS
DETAIL "B"
COG
Bracket
DETAIL "D"
COG Position 6
COG Position 7
L-Bracket
Base
Frame
Washers, Coved Spacer
COG Position 5
COG Position 4
COG Position 3
COG Position 2
COG Position 1
L-Bracket
COG
Bracket
Mounting Screw, Two
and Locknut