Installing Seat Positioning Strap - Invacare 9000 Topaz User Manual

11.2 Installing Seat Positioning Strap

1. Remove the two existing back upholstery mounting screws and
washer located second up from the bottom of both back canes.
Discard back upholstery screws and washers.
 The seat positioning strap may be installed with
the locking/releasing buckle on the right or left
side of the wheelchair back according to user
preference.
2. Position the seat positioning strap around the outside of the back
upholstery and back canes.
3. Secure the seat positioning strap and back upholstery to the back
canes with the two new back upholstery mounting screws and
washers. Securely tighten.
Part No 1100869
Back
Upholstery
Washer
Mounting
Screw
FIGURE 2
53
11 OPTIONS
Back Cane
Locking/Releasing
Buckle
Installing Seat Positioning Strap
Invacare®9000 Topaz™Wheelchair
Seat
Positioning
Strap