HP Surestore Tape Library Model 2/15 User Manual page 86

Library Operation
Using Online Repair
6. Press until DRV # OFF FAILED displays then press
NEXT
7. CHANGE CONFIRMED displays briefly, then ONLINE REPAIR*
displays. Press
ENTER
8. DRIVE POWER* displays.
9. Press or
NEXT PREV
10. Press or
NEXT PREV
number of the drive that was just taken offline) then press
11. DRV # OFF FAILED displays, where "#" is the drive number and "OFF
FAILED" is flashing.
12. Press until DRV # ON GOOD displays, then press
NEXT
13. SETTING UP DRIVE displays briefly while the drive communication
tests run, then CHANGE CONFIRMED displays briefly, then ONLINE
REPAIR* displays.
14. Press twice to return to the drive numbers and status indicators
CANCEL
("ready" state).
15. Try reading the damaged tape again.
• If the tape can be read, back up data from the damaged cartridge to
another tape cartridge and discard the damaged one.
• If the tape cannot be read, call a service representative.
4-36
.
until DRIVE STATUS displays, then press
until DRV # OFF FAILED displays (where "#" is the
.
ENTER
.
ENTER
.
ENTER
.
ENTER