Table of Contents
Advertisement
Library Operation
Loading Cartridges Into the Library
8. Insert the magazine so it lines up with the arrow on the label inside the
Figure 4-5
Inserting Magazines
9. Shut and lock the access door using the key lock. Make sure the door is
NOTE
The library Inventory Check test runs when the access door is closed so that
an inventory of tape bar code labels and storage slot locations can be stored
into library memory. This process takes about one minute. The test fails if the
door is not completely shut.
WARNING
Do not attempt to disable the interlocks. If the library is operating
with fewer than three magazines inserted and the door open, the user
can be exposed to Class II laser light emitted from the bar code
reader.
4-16
library, the handle is facing the front of the library, and the tapes are
facing the inside of the tape library. The magazine should "click" into
place.
shut completely.
Advertisement
Table of Contents
