Reports - HP Integrity Superdome 2 16-socket User Manual

[END]
[TARGETS]
HOST=16.83.62.196
UID=Userid
PWD=password
[END]
[TARGETS]
HOST=16.83.61.24
UID=Userid
PWD=password
[END]
Example: Superdome 2 input files:
IGNOREWARNINGS = TRUE
[TARGET] HOST = 10.0.0.206
UID = Userid
PWD = password
UPDATETYPE = PARTITIONS
DEVICELIST = npar1, npar2, blade1/4, blade 1/5
REBOOTLIST = npar1, npar2
[END]

Reports

HP SUM generates three types of reports about the specified system or repository. HP SUM generates
these reports by using the command-line arguments. If no additional arguments are specified on
the command line, HP SUM uses the local host and default repository locations (the directory where
HP SUM was initiated). You can specify a target if you provide the appropriate credentials. You
can specific a repository by using other command-line parameters to generate reports. For specific
commands, see
Report type
/report
/inventory_report
/firmware_report
"Command-line interface" (page
Description
This argument generates a report
listing, a target summary, and
description of how the
components in the repository
affect the target. For example,
whether each component applies
to the target.
Usage: hpsum /report
This argument generates a report
listing of the components in the
specified repository.
Usage: hpsum
/inventory_report
This argument generates a report
listing of the firmware in the
specified repository.
Usage: hpsum
/firmware_report
31).
Report file information*
The following report files are generated:
hpsum_Report_<date>.html
hpsum_Report_<date>.xml
The following report files are generated:
hpsum_Inventory_Report_<date>.html
hpsum_Inventory_Report_<date>.xml
The following report files are generated:
HPSUM_Firmware_Report_<date>
fwreport.xml is placed in a folder named
HPSUM_Firmware_Report_<date>
Reports 53