The following table describes TPM detection scenarios that you might encounter.
Scenario
If TPM is detected and enabled, the installation is not silent,
and a system ROM must be updated.
If TPM is detected and enabled, the installation is silent,
the /tpmbypass switch is not given, and any firmware
updated must be applied to the server.
If TPM is detected and enabled with Option ROM
Measuring, the installation is not silent, and a system ROM
must be updated.
If TPM is detected and enabled with Option ROM
Measuring, the installation is silent; the /tpmbypass
switch the installation is silent, the installation is terminated
and cannot continue. is not given, and any firmware
updated must be applied to the server.
If TPM is detected and enabled, the installation is silent,
The installation occurs. and the /tpmbypass switch is
supplied.
14
Introduction
Result
A warning message appears. Select OK to continue. The
installation is not canceled.
No warning appears. A new log file is generated
(%systemdrive%\cpqsystem\log\cpqstub.log).
Because the installation is silent, the installation is
terminated and cannot continue.
A warning message appears. After selecting OK, you can
continue. The installation is not canceled.
No warning appears. A new log file is generated
(%systemdrive%\cpqsystem\log\cpqstub.log).
Because the installation is silent, the installation is
terminated and cannot continue.
The installation occurs.