HP Integrity Superdome 2 16-socket User Manual page 35

Installation options
/use_web
/use_proxy <Proxy server>
/proxy_script <Proxy script>
/proxy_password<password>
/use_d[ownloaded]
/use_snmp
/use_wmi
/use_ams
/romonly
/softwareonly
/express_install
Description
The /user and /passwd arguments do not have any
effect when you are attempting to access the file share.
Use those arguments only when you are connecting to a
target system.
Specifies that the check box for Check ftp.hp.com on the
Source Selection screen is selected. This enables
components to be retrieved from
the list of possible updates.
Enables the inclusion of a proxy server (and port number)
to access ftp.hp.com. This parameter must be used with
/use_web. For example, /use_web /use_proxy
<1.22.33.44:80>.
Enables the inclusion of a proxy script to access ftp.hp.com.
This parameter must be used with /use_web. For example,
/use_web /proxy_script <autoproxy.com>.
Sets the password to be used for an authenticating proxy
server.
Specifies that the check box for Use last downloaded
repository from ftp.hp.com on the Source Selection screen
in the GUI is selected. This enables the previously
downloaded components to be included in the list of
possible updates.
Specifies that components that use SNMP protocol and the
AMS components are available for installation by default.
When the /use_snmp argument is used, the AMS
components are required, but the WMI components are
optional.
Specifies that components that use the WMI protocol are
available for installation. These components are optional
and are not installed unless this argument is used. When
the /use_wmi argument is used, and the /use_snmp &
/use_ams arguments are not, the SNMP and AMS
components are optional. This argument does not apply
to HP Integrity servers.
Specifies which AMS components can be installed along
with SNMP components. The AMS and SNMP components
are available to select by default. When the /use_ams
argument is used, the SNMP components are required,
and the WMI components are optional.
This filter switch allows you to see only the firmware
components needed for installation. When you are using
this filter switch, you must exit and restart HP SUM if you
want to return to an unfiltered state.
Do not use the /romonly argument with the
/softwareonly argument. (Applies to firmware only.)
This filter switch allows you to see only the software
components needed for installation. When you are using
this filter switch, you must exit and restart HP SUM if you
want to return to an unfiltered state.
Do not use the /softwareonly argument with the
/romonly argument.
Starts an express installation (for the local host only). The
HP SUM performs discovery, installation, or exit without
user interaction. You can cancel or terminate HP SUM. An
express installation will force install all components in the
ftp.hp.com and used in
Command-line interface 35