Show Oa Status; Show Power - HP Integrity Superdome 2 16-socket User Manual

Enclosure IP Mode: Not Supported

SHOW OA STATUS

Command:
SHOW OA STATUS [ALL | <bay number> [{ , | - } <bay number>]]
Description:
Displays health status for the Onboard Administrator. If you do not specify the Onboard
Administrator, the command defaults to the Active Onboard Administrator.
Access level/Bay level:
All
Restrictions:
None
Example:
sphere-oa2> show oa status
Onboard Administrator #2 Status:
Name:
Role:
UID:
Status: OK
Diagnostic Status:

SHOW POWER

Command:
SHOW POWER
Description:
Displays the current power configuration
Access level/Bay level:
All
Restrictions:
None
Example:
sphere-oa2> show power
Power Mode: Redundant
Dynamic Power: Enabled
Set Power Limit: Not Set
Power Capacity:
Power Available:
Power Allocated:
Present Power:
Power Limit:
88 Enclosure management commands
sphere-oa2
Active
Off
Internal Data
Firmware Mismatch
14400 Watts DC
12775 Watts DC
1625 Watts DC
1161 Watts AC
17510 Watts AC
OK
OK