Set Oa Gateway; Set Oa Name; Set Oa Uid - HP Integrity Superdome 2 16-socket User Manual

Access level/Bay level
Administrator, OA Operator
Restrictions:
The <ip address> must be in the form ###.###.###.###, where each ### ranges from
0 to 255.

SET OA GATEWAY

Command:
SET OA GATEWAY [<bay number>] <ip address>
Description:
◦
Sets the network default gateway.
◦
This command is used if the system is configured to use a static IP address.
◦
If you do not specify a bay number, the command defaults to the active Onboard
Administrator.
Access level/Bay level:
OA Administrator, OA Operator
Restrictions:
The <ip address> must be in the form ###.###.###.###, where each ### ranges from 0 to
255.

SET OA NAME

Command:
SET OA NAME [<bay number>] "<OA name>"
Description:
Sets the Onboard Administrator name. If a bay number is not specified, the command defaults
to the active Onboard Administrator.
Access level/Bay level:
OA Administrator, OA Operator
Restrictions:
The Onboard Administrator name is 1 to 32 characters long including all alphanumeric
characters and the dash (-). The name cannot begin or end with a dash and cannot be entirely
numeric.

SET OA UID

Command:
SET OA UID [<bay number>] {ON | OFF}
Description:
Sets the Onboard Administrator UID on or off.
If you do not specify a bay number, the command defaults to the active Onboard Administrator.
SET OA GATEWAY 65