Set Snmp Contact; Set Snmp Location; Show Network - HP Integrity Superdome 2 16-socket User Manual

◦
The default read community name is public.
◦
The default write community name is public.

SET SNMP CONTACT

Command:
SET SNMP CONTACT "<contact>"
Description:
Configures the name of the system contact. The default contact is blank.
Access level/Bay level:
OA Administrator, OA Operator
Restrictions:
The <contact> must be no more than 20 characters long. Valid characters are all
alphanumeric, the underscore (_), the dash (-), and spaces.

SET SNMP LOCATION

Command:
SET SNMP LOCATION "<location>"
Description:
Configures the SNMP location of the enclosure. The default location is blank.
Access level/Bay level:
OA Administrator, OA Operator
Restrictions:
The <location> must be no more than 20 characters long. Valid characters are all
alphanumeric, the underscore (_), the dash (-), and spaces.

SHOW NETWORK

Command:
SHOW NETWORK
Description:
Displays:
◦
DHCP state
◦
Dynamic DNS state
◦
IP address subnet mask
◦
Gateway address
◦
Primary and secondary DNS addresses
◦
MAC address
◦
HTTP and HTTPS server status
◦
SNMP status
SET SNMP CONTACT 67