Viewing The List Of Indicted Components - HP Integrity Superdome 2 16-socket Service Manual

Hp integrity superdome 2 user service guide

Hide thumbs Also See for Integrity Superdome 2 16-socket:

User manual (217 pages)

Administrator's manual (110 pages)

Getting started manual (23 pages)

Table Of Contents

100

101

102

103

104

Table of Contents

well. For example, DIMMs and CPU sockets on an inserted blade will be acquitted. Any

deconfigurations will be reversed.

AC power cycle or CLI poweron xfabric command — HR will assume that the required service

has been accomplished for the entire complex. All FRUs and sub-FRUs will be acquitted and

reconfigured.

Cohort acquittal — When analysis of a single fault event results in indictment or suspicion

records against multiple components, the records are linked together. If one is acquitted, the

acquittal will be passed to the cohort FRUs as well.

For example, if a cabled fabric link between the XFM and IOX has failed, the analysis engine

will indict the cable connectors physical locations (representing the cable as the most likely

component failure). Each will have the subFRU locality of the related port identified and

deconfigured to prevent subsequent use of the link. Acquittal of the fabric cable connectors

after cable service will acquit all for records.

HR test commands — The test camnet and test clocks commands will acquit all indictments

specific to the test to be executed. Resources that fail the test will be re-indicted as the test

completes. The test fabric command acquits each type (fabric, CAMNet, Global Clock) of

indictment before initiating the test.

NOTE:

acquitted. For example, a blade indictment for CPU fault will not be acquitted by any of these

test commands.

Start Link — Attempting to service a cabled link while in use will result in an indictment. The

stop link command prevents these indictments and alerts caused by service actions and lights

the appropriate LINK health LEDs to help identify the physical cable needing service.

The start link command clears the link health LEDs, acquits, and attempts link retraining.

Manual Acquittal – The HR UI includes an acquit command that uses the component physical

location or resource path as a parameter. Like other acquittals, the acquittal will act on all

indictments for that component.

Component resumes normal function.

In most cases resumption of function will not cause automatic acquittal. Component replacement,

complex AC power cycle or manual acquittal is required. Examples are:

◦

BPS indicted for loss of AC input regains power input.

◦

Environmental temperature returns to within acceptable bounds.

◦

Enclosure regains sufficient power due to BPS replacement.

◦

Enclosure regains sufficient cooling due to fan replacement.