Advertisement
Closed defect summary
Error message is not displayed when Trace Route
nl
operation fails due to McDATA fabric mode.
Informational message is not appearing when the user
tries to enable notification from the user dialog, when
it is disabled from the main dialog(Monitor >
Event Notification > Email).
Symptom—User will not get warned that the
notification is disabled when he tries to enable an
event notification from the user management dialog.
The connection between the FOS and EOS switches
is not shown on launching DCFM Client for the first
time after a migration from EFCM to DCFM.
Symptom—On launching DCFM Client for the first time
after a migration from EFCM to DCFM, the connection
between the FOS and the EOS switch is not displayed
in the Connectivity map.
Changing server IP after DCFM installation created
multiple issues.
Symptom—During installation, the option 'any' was
chosen in the ipconfiguration screen. After installing
DCFM, on changing the server machine IP, it is
observed that the DCFM client is not launching. The
Client login window itself was not shown on trying to
launch the DCFM client. The DCFM server services
were still running. The client failed to launch even after
restarting the server.
Zoning Report not showing {D, P} alias members under
Alias section.
Symptom—When user generates report with {D,P}
alias members, the report shows {D,P} section for each
{D,P} alias member instead of members for each alias
in the Alias section
Zoning Report from Zoning dialog showing same zone
members multiple times.
Symptom—When user generates report from the Zone
DB tab or Active Zone Config tab, the report shows
the same zone member multiple times.
In Zoning report, the Number of Members count is
wrong when a zone contains different types of
nl
members including alias.
Symptom—When user generates report, the Number
of Members column shows wrong value when a zone
contains aliases and other type members.
16
Solution
Fixed in DCFM 10.1.0
Workaround—Trace Route summary dialog shows
information in Fcping tab and blank Forward and
Reverse Route tabs instead of showing an error
message when McDATA fabric mode is set.
Fixed in DCFM 10.1.0
Fixed in DCFM 10.1.0
Workaround—Close and relaunch the DCFM Client.
Fixed in DCFM 10.1.0
Fixed in DCFM 10.1.0
Fixed in DCFM 10.1.0
Fixed in DCFM 10.1.0
Workaround—Get exact number of member count
From Zone properties.
Advertisement
