Philips Saeco XSmall HD8743 User Manual page 37

Light Signals Causes
The water circuit is empty.
Quickly ashing
Brew group is not inserted. Coffee ground drawer is
not inserted.
Slowly ashing
Service door is open.
Control dial is not in correct position.
The machine is performing the rinse/self-cleaning
cycle.
+
Flashing in counter-
clockwise direction (cyclical)
A fault has occurred in the brew group.
Flashing
alternately
A fault has occurred in the machine and hot water,
steam or espresso cannot be dispensed.
+
Flashing
simultaneously
Solutions
Fill the water tank with fresh water and prime the water circuit as
described in Section "Using the Machine for the First Time".
Make sure that all components have been correctly inserted and
closed. The blinking red light will now turn o .
The machine ends the rinse/self-cleaning cycle automatically.
You can interrupt the rinse/self-cleaning cycle by pressing
" "
either buttons
Try again to brew another espresso.
Turn the machine o . After 30-seconds, turn it back on.
Try this 2 or 3 times.
If the machine does NOT start, contact the Philips Saeco hotline.
ENGLISH
35
" "