Steam/Co Ee Switchover - Philips Saeco XSmall HD8743 User Manual

After using the steam to froth the milk, clean the hot water/steam
wand (or Pannarello, if supplied) by dispensing a small amount of hot
water into a container. For detailed cleaning instructions please see
the "Cleaning and Maintenance" section.
If you want to brew an espresso after having dispensed steam, you rst
need to bring the machine back to the co ee brewing temperature. For
this follow the steps described below:

Steam/Co ee Switchover

1
Flashing fast
2
3
4
5
6
7
Caution:
After dispensing steam and pressing "
light ashes fast to show that the machine is overheated and cannot
brew co ee.
To brew co ee, rst drain a small amount of water.
Place a container under the hot water/steam wand (Pannarello, if sup-
plied) and turn the control dial clockwise to the "
Hot water will be dispensed.
Wait for the temperature " " light shines steadily.
Then turn the control dial counterclockwise back to the " " position to
stop dispensing.
Now follow the procedure described in the "Brewing espresso" section
to brew co ee.
ENGLISH
21
" or " " button, the " "
" position.