Meaning Of The Light Signals; Control Panel Display - Philips Saeco XSmall HD8743 User Manual

ENGLISH
34
Light Signals Causes
The machine has reached the right temperature and
Steady on is now ready:
- For co ee brewing;
- For hot water dispensing;
- For steam dispensing
The machine is warming up to brew espresso and
Slowly ashing
dispense hot water or steam.
Machine is overheating. Co ee may not be brewed.
Quickly ashing
The machine needs to be descaled.
Flashing very
quickly
The machine is in the descaling cycle.
Indicates that the machine is programming the
amount of co ee to brew .
Slowly ashing
During the descaling phase the control dial is not in
the correct position.
The machine is brewing a double co ee.
The light is steady on at the beginning of the descaling
Steady on
cycle.
Low water level.
Steady on
The co ee bean hopper is empty.
The co ee ground drawer is full.
Steady on

MEANING OF THE LIGHT SIGNALS

Control panel display

Solutions
The water must be drained into a container by turning the control dial
" "
clockwise to the position until the green ready temperature
" "
light shines steadily. After that, stop dispensing water.
Start the descaling cycle.
If you don't descale regularly, the machine will stop working
properly. This is not covered by warranty.
Bring the control dial back to " ".
Prime the circuit and continue the descaling cycle.
Fill the water tank with fresh water. After re lling the water tank,
the indicator light turns o .
Fill the coffee bean hopper with coffee beans and start the
procedure again.
With the machine turned on, empty the co ee ground drawer. The
co ee ground drawer must be emptied after every 8 co ee cycles. If
the co ee ground drawer is emptied with the machine turned o , or
when the indicator light is not illuminated, the count of co ee cycles
is not reset. For this reason, the indicator light to empty the co ee
ground drawer may illuminate even when it is not full.