Smtp Setup Menu - Lexmark E460dw User Manual

SMTP Setup menu

Use the following menu to configure the SMTP server.
Menu item
Primary SMTP Gateway
Primary SMTP Gateway Port
Secondary SMTP Gateway
Secondary SMTP Gateway Port
SMTP Timeout
5–30
Reply Address
Use SSL
Disabled
Negotiate
Required
SMTP Server Authentication
None
Plain (Simple)
CRAM MD5
Digest MD5
NTLM
Kerberos 5
Device-Initiated E-mail
None
Use Device Credentials
User-Initiated E-mail
None
Use Device SMTP Credentials
Device Userid
Device password
Kerberos 5 Realm
NTLM Domain
Description
Specifies SMTP server and port information
Note: 25 is the factory default setting for each SMTP Gateway Port menu
item.
Specifies the amount of time in seconds before the server stops trying
to send the e-mail
Note: 30 seconds is the factory default setting.
Specifies server information. This is a required item.
Note: The message box has a limitation of 512 characters.
Sets the printer to use SSL for increased security when connecting to the
SMTP server
Notes:
•
Disabled is the factory default setting for Use SSL.
•
When the Negotiate setting is used, your SMTP server determines if
SSL will be used.
Specifies the type of user authentication required for scan to e-mail
privileges
Note: None is the factory default setting.
Specifies server information
Notes:
•
The message boxes have a limitation of 512 characters.
•
None is the factory default setting for Device-Initiated E-mail and
User-Initiated E-mail.
Understanding printer menus
93