52. Connect the vacuum hoses between the
vacuum manifold and the collection drum
vacuum ports with (4) 1
figure 45–46).
figure 46. Connecting the vacuum hose.
53. secure the vacuum hose inside the upper
and lower stand legs with the (2) u-shaped
clips (see figure 47).
figure 47. securing the vacuum hose to the
stand legs.
-30-
⁄
" hose clamps (see
1
4
54. model g0637 only: Mount the control box
onto the lower stand brace with (3)
⁄
" hex bolts, (6)
⁄
3
3
4
8
16 hex nuts (see figure 48).
note: The remote control uses IR (infrared)
to communicate with the control box, and
must have direct line-of-sight to the control
box. Locate the control box with this in mind.
figure 48. Model g0637 control box mounted.
55. model g0638 only: Mount the control brack-
et onto the lower stand brace with (2)
x
⁄
" hex bolts, (4)
3
4
"-16 hex nuts (see figure 49).
⁄
3
8
figure 49. Model g0638 control box bracket
mounted.
Model G0637/G0638 (Mfg. Since 04/12)
3
⁄
"-16 x
8
" flat washers, and (3)
3
⁄
"-16
3
8
⁄
" flat washers, and (2)
3
8
⁄
"-
8