Outputting Logs To A Log Host; Outputting Logs To The Log Buffer - HP 6125XLG Configuration Manual

Step
3. Configure an output rule for
the monitor terminal.
4. (Optional.) Configure the
timestamp format.
5. Return to user view.
6. Enable log output to the
monitor terminal.
7. (Optional.) Enable the display
of debug information on the
current terminal.
8. (Optional.) Set the lowest level
of logs that can be output to
the monitor terminal.

Outputting logs to a log host

Step
1. Enter system view.
2. Enable the information
center.
3. Configure an output rule
for the log host.
4. (Optional.) Specify the
source IP address for
output logs.
5. (Optional.) Configure
the timestamp format.
6. Specify a log host and
configure related
parameters.

Outputting logs to the log buffer

Step
1. Enter system view.
Command
info-center source { module-name |
default } { console | monitor |
logbuffer | logfile | loghost }
{ deny | level severity }
info-center timestamp { boot | date
| none }
quit
terminal monitor
terminal debugging
terminal logging level severity
Command
system-view
info-center enable
info-center source { module-name |
default } { console | monitor |
logbuffer | logfile | loghost } { deny
| level severity }
info-center loghost source
interface-type interface-number
info-center timestamp loghost { date
| iso | no-year-date | none }
info-center loghost [ vpn-instance
vpn-instance-name ] { ipv4-address
| ipv6 ipv6-address } [ port
port-number ] [ facility
local-number ]
Command
system-view
57
Remarks
For information about default
output rules, see "Default log
output rules."
By default, the timestamp format is
date.
N/A
The default setting is enabled.
By default, the display of debug
information is disabled on current
monitor terminal.
The default setting is 6
(Informational).
Remarks
N/A
By default, the information center is
enabled.
For more information about default
output rules, see "Default log output
rules."
By default, the source IP address of
output log information is the primary IP
address of the matching route' egress
interface.
By default, the timestamp format is
date.
By default, no log host or related
parameters are specified.
The value of the port-number argument
must be the same as the value
configured on the log host. Otherwise,
the log host cannot receive logs.
Remarks
N/A