Configuration Procedure; Configuring The Nqa Statistics Collection Function - HP 6125XLG Configuration Manual

Before an NQA operation starts, the reaction entry is in invalid state.
•
• If the threshold is violated, the state of the entry is set to over-threshold. Otherwise, the state of the
entry is set to below-threshold.

Configuration procedure

To configure threshold monitoring:
Step
1. Enter system view.
2. Create an NQA
operation and enter
NQA operation view.
3. Enter NQA operation
view.
4. Configure threshold
monitoring.

Configuring the NQA statistics collection function

NQA collects statistics for operations completed within a specific period. The statistics forms a statistics
group. A statistics group is generated after an operation is completed. To view information about the
statistics groups, use the display nqa statistics command.
A statistics group is deleted when its hold time expires. When the maximum number of statistics groups
is reached, to save a new statistics group, the oldest statistics group is deleted.
If you use the frequency command to set the interval between two consecutive operations to 0, only one
operation is performed and no statistics group information is generated.
To configure the NQA statistics collection function:
Step
1. Enter system view.
2. Create an NQA operation and
enter NQA operation view.
3. Specify an NQA operation type
and enter its view.
Command
system-view
nqa entry admin-name operation-tag
type { icmp-echo | udp-echo }
•
Monitor the operation duration:
reaction item-number checked-element
probe-duration threshold-type { accumulate
accumulate-occurrences | average | consecutive
consecutive-occurrences } threshold-value
upper-threshold lower-threshold [ action-type
none ]
•
Monitor failure times:
reaction item-number checked-element probe-fail
threshold-type { accumulate
accumulate-occurrences | consecutive
consecutive-occurrences } [ action-type none ]
Command
system-view
nqa entry admin-name
operation-tag
type { icmp-echo | udp-echo }
87
Remarks
N/A
By default, no NQA
operation is created.
N/A
By default, no reaction
entry is configured.
Remarks
N/A
By default, no NQA operation is
created.
N/A