Arp Static - HP 6125XLG Command Reference Manual

Parameters
ip-address: Specifies an IP address for the multiport ARP entry.
mac-address: Specifies a MAC address for the multiport ARP entry, in the format of H-H-H.
vlan-id: Specifies a VLAN for the multiport ARP entry, in the range of 1 to 4094.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN for the multiport ARP entry. The
vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. The specified VPN instance
must already exist. Without this option, the multiport ARP entry belongs to the public network.
Usage guidelines
The specified VLAN must already exist. If the specified VLAN or the corresponding VLAN interface is
removed, the multiport ARP entry is also removed.
The specified IP address must reside on the same subnet as the virtual interface of the specified VLAN.
Otherwise, the multiport ARP entry does not take effect.
To use the multiport ARP entry, you must also configure a multicast or multiport unicast MAC address
entry that has the same MAC address and VLAN ID as the multiport ARP entry to specify multiple output
interfaces.
Examples
# Configure a multiport ARP entry that comprises IP address 202.38.10.2 and MAC address
00e0-fc01-0000 in VLAN 10.
<Sysname> system-view
[Sysname] arp multiport 202.39.10.2 00e0-fc01-0000 10
Related commands
• display arp multiport
reset arp multiport
•

arp static

Use arp static to configure a static ARP entry.
Use undo arp to remove an ARP entry.
Syntax
arp static ip-address mac-address [ vlan-id interface-type interface-number ] [ vpn-instance
vpn-instance-name ]
undo arp ip-address [ vpn-instance-name ]
Default
No static ARP entries are configured.
Views
System view
Predefined user roles
network-admin
Parameters
ip-address: Specifies the IP address in an ARP entry.
3