Dhcp Relay Information Remote-Id - HP 6125XLG Command Reference Manual

Default
The DHCP relay agent does not support Option 82.
Views
Interface view
Predefined user roles
network-admin
Usage guidelines
With this feature enabled, the DHCP relay agent adds Option 82 to a DHCP request that does not
contain Option 82 before forwarding it to the DHCP server. You can configure the content of Option 82
with the dhcp relay information circuit-id and dhcp relay information remote-id commands. If the DHCP
request contains Option 82, the relay agent handles the request according to the strategy specified by
the dhcp relay information strategy command.
With this feature disabled, the relay agent does not add or handle Option 82.
Examples
# Enable Option 82 support on the relay agent.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] dhcp relay information enable
Related commands
dhcp relay information circuit-id
•

dhcp relay information remote-id

•
dhcp relay information strategy
•
display dhcp relay information
•
dhcp relay information remote-id
Use dhcp relay information remote-id to configure the padding content and padding format for the
remote ID sub-option of Option 82.
Use undo dhcp relay information remote-id to restore the default.
Syntax
dhcp relay information remote-id { normal [ format { ascii | hex } ] | string remote-id | sysname }
undo dhcp relay information remote-id
Default
The content mode is normal and the padding format is hex.
Views
Interface view
Predefined user roles
network-admin
68