Local-Proxy-Arp Enable - HP 6125XLG Command Reference Manual

Parameters
interface interface-type interface-number: Displays the proxy ARP status for the specified interface.
Usage guidelines
The proxy ARP status can be enabled or disabled.
If you specify an interface, this command displays proxy ARP status for the specified interface.
If you do not specify any interface, this command displays proxy ARP status for all interfaces.
Examples
# Display the proxy ARP status on VLAN-interface 1.
<Sysname> display proxy-arp interface Vlan-interface 1
Interface Vlan-interface1
Proxy ARP status: disabled
Related commands
proxy-arp enable

local-proxy-arp enable

Use local-proxy-arp enable to enable local proxy ARP.
Use undo local-proxy-arp enable to disable local proxy ARP.
Syntax
local-proxy-arp enable [ ip-range startIP to endIP ]
undo local-proxy-arp enable
Default
Local proxy ARP is disabled.
Views
VLAN interface view
Predefined user roles
network-admin
Parameters
ip-range startIP to endIP: Specifies the IP address range for which local proxy ARP is enabled. The start
IP address must be lower than or equal to the end IP address.
Usage guidelines
Proxy ARP enables a device on a network to answer ARP requests for an IP address not on that network.
With proxy ARP, hosts on different broadcast domains can communicate with each other as they do on
the same network.
Proxy ARP includes common proxy ARP and local proxy ARP.
Common proxy ARP allows communication between hosts that connect to different Layer-3 interfaces and
reside in different broadcast domains.
Local proxy ARP allows communication between hosts that connect to the same Layer-3 interface and
reside in different broadcast domains.
15