Enabling The Session-Control Feature; Displaying And Maintaining Aaa - HP 6125XLG Configuration Manual

Step
1. Enter system view.
2. Enter ISP domain view.
3. Specify the default
accounting method for all
types of users.
4. Specify the command
accounting method.
5. Specify the accounting
method for LAN users.
6. Specify the accounting
method for login users.

Enabling the session-control feature

A RADIUS server running on IMC can send a dynamic authorization change request or a disconnect
request by using a session-control packet. This task enables the device to receive RADIUS session-control
packets on UDP port 1812.
To enable the session-control feature:
Step
1. Enter system view.
2. Enable the session-control
feature.

Displaying and maintaining AAA

Execute the display command in any view.
Task
Display the configuration of ISP domains.
Command
system-view
domain isp-name
accounting default { hwtacacs-scheme
hwtacacs-scheme-name [ radius-scheme
radius-scheme-name ] [ local ] [ none ] |
local [ none ] | none | radius-scheme
radius-scheme-name [ hwtacacs-scheme
hwtacacs-scheme-name ] [ local ] [ none ] }
accounting command hwtacacs-scheme
hwtacacs-scheme-name
accounting lan-access { local [ none ] |
none | radius-scheme radius-scheme-name
[ local ] [ none ] }
accounting login { hwtacacs-scheme
hwtacacs-scheme-name [ radius-scheme
radius-scheme-name ] [ local ] [ none ] |
local [ none ] | none | radius-scheme
radius-scheme-name [ hwtacacs-scheme
hwtacacs-scheme-name ] [ local ] [ none ] }
Command
system-view
radius session-control enable
Command
display domain [ isp-name ]
44
Remarks
N/A
N/A
By default, the accounting
method is local.
The none keyword is not
supported in FIPS mode.
By default, the default
accounting method is used
for command accounting.
By default, the default
accounting method is used
for LAN users.
The none keyword is not
supported in FIPS mode.
By default, the default
accounting method is used
for login users.
The none keyword is not
supported in FIPS mode.
Remarks
N/A
By default, the session-control
feature is disabled.