Entering Fips Mode Through Manual Reboot - HP 6125XLG Configuration Manual

old password:
new password:
confirm:
Updating user information. Please wait ... ...
...
# Display the current FIPS mode state.
<Sysname> display fips status
FIPS mode is enabled.
# Display the default configuration file.
<Sysname> more fips-startup.cfg
#
password-control enable
#
local-user root class manage
service-type terminal
authorization-attribute user-role network-admin
#
fips mode enable
#
return
<Sysname>

Entering FIPS mode through manual reboot

Network requirements
Use the manual reboot method to enter FIPS mode, and use a console port to log in to the device in FIPS
mode.
Configuration procedure
# Enable the password control function globally.
<Sysname> system-view
[Sysname] password-control enable
# Set the number of character types a password must contain to 4, and set the minimum number of
characters for each type to one character.
[Sysname] password-control composition type-number 4 type-length 1
# Set the minimum length of user passwords to 15 characters.
[Sysname] password-control length 15
# Add a local user account for device management, including a username of test, a password of
12345zxcvb!@#$%ZXCVB, a user role of network-admin, and a service type of Terminal.
[Sysname] local-user test class manage
[Sysname-luser-manage-test] password simple 12345zxcvb!@#$%ZXCVB
[Sysname-luser-manage-test] authorization-attribute user-role network-admin
[Sysname-luser-manage-test] service-type terminal
[Sysname-luser-manage-test] quit
# Enable FIPS mode, and choose the manual reboot method to enter FIPS mode.
196