HP 6125XLG Configuration Manual page 40

Blade switch security configuration guide
Table of Contents

Advertisement

Tasks at a glance
(Optional.)
(Optional.)
(Optional.)
(Optional.)
(Optional.)
Creating an HWTACACS scheme
Create an HWTACACS scheme before performing any other HWTACACS configurations. You can
configure up to 16 HWTACACS schemes. An HWTACACS scheme can be referenced by multiple ISP
domains.
To create an HWTACACS scheme:
Step
1.
Enter system view.
2.
Create an HWTACACS
scheme and enter its view.
Specifying the HWTACACS authentication servers
You can specify one primary authentication server and up to 16 secondary authentication servers for an
HWTACACS scheme. When the primary server is not available, the device tries to communicate with the
secondary servers in the order they are configured, and communicates with the first secondary server in
active state. If no redundancy is needed, specify only the primary server. An HWTACACS server can
function as the primary authentication server in one scheme and as the secondary authentication server
in another scheme at the same time.
To specify HWTACACS authentication servers for an HWTACACS scheme:
Step
1.
Enter system view.
2.
Enter HWTACACS
scheme view.
3.
Specify HWTACACS
authentication servers.
Specifying a VPN for the scheme
Setting the username format and traffic statistics units
Specifying the source IP address for outgoing HWTACACS packets
Setting HWTACACS timers
Displaying and maintaining HWTACACS
Command
system-view
hwtacacs scheme hwtacacs-scheme-name
Command
system-view
hwtacacs scheme
hwtacacs-scheme-name
Specify the primary HWTACACS
authentication server:
primary authentication { ipv4-address
| ipv6 ipv6-address } [ port-number |
key { cipher | simple } string |
vpn-instance vpn-instance-name ] *
Specify a secondary HWTACACS
authentication server:
secondary authentication
{ ipv4-address | ipv6 ipv6-address }
[ port-number | key { cipher | simple }
string | vpn-instance
vpn-instance-name ] *
31
Remarks
N/A
By default, no HWTACACS
scheme is defined.
Remarks
N/A
N/A
Configure at least one command.
By default, no authentication
server is specified.
Two HWTACACS authentication
servers in a scheme, primary or
secondary, cannot have the same
combination of IP address, port
number, and VPN.

Advertisement

Table of Contents
loading

Table of Contents