HP 6125XLG Configuration Manual page 34

Step
4. (Optional.) Set the maximum
number of real-time
accounting attempts.
Specifying the shared keys for secure RADIUS communication
The RADIUS client and server use the MD5 algorithm and shared keys to generate the Authenticator
value for packet authentication and user password encryption. They must use the same key for each type
of communication.
A key configured in this task is for all servers of the same type (accounting or authentication) in the
scheme, and has a lower priority than a key configured individually for a RADIUS server.
To specify a shared key for secure RADIUS communication:
Step
1. Enter system view.
2. Enter RADIUS scheme view.
3. Specify a shared key for
secure RADIUS
communication.
Specifying a VPN for the scheme
The VPN specified for a RADIUS scheme applies to all authentication and accounting servers in that
scheme. If a VPN is also configured for an individual RADIUS server, the VPN specified for the RADIUS
scheme does not take effect on that server.
To specify a VPN for a scheme:
Step
1. Enter system view.
2. Enter RADIUS scheme view.
Specify a VPN for the RADIUS
3.
scheme.
Setting the username format and traffic statistics units
A username is typically in the format userid@isp-name, where isp-name represents the user's ISP domain
name. By default, the ISP domain name is included in a username. However, some earlier RADIUS
servers do not recognize usernames that contain the ISP domain names. In this case, you can configure
the device to remove the domain name of each username to be sent.
For correct identification of users, do not configure the device to remove the ISP domain names from
usernames for the RADIUS scheme that is referenced by two or more ISP domains.
The device reports online user traffic statistics in accounting packets. The traffic measurement units are
configurable, but they must be the same as configured on the RADIUS accounting servers.
Command
retry realtime-accounting retry-times
Command
system-view
radius scheme
radius-scheme-name
key { accounting | authentication }
{ cipher | simple } string
Command
system-view
radius scheme radius-scheme-name
vpn-instance vpn-instance-name
25
Remarks
The default setting is 5.
Remarks
N/A
N/A
By default, no shared key is
specified.
The shared key configured on the
device must be the same as that
configured on the RADIUS server.
Remarks
N/A
N/A
By default, a RADIUS scheme
belongs to the public network.