Leds; Unit Id Led; Health Led; 10/100/1000Base-T Ethernet Port Led - HP 6125G Installation Manual

Figure 15 SFP+ cable
(1)
(1) Connector

LEDs

Unit ID LED

Table 11 Unit ID LED description
LED mark
UID

Health LED

Table 12 Health LED description
LED mark

10/100/1000Base-T Ethernet port LED

Table 13 10/100/1000Base-T auto-sensing Ethernet port LED description
Port LED status
Steady green
Steady yellow
Off
(2)
Status
Blue
Off
Status
Green
Flashing yellow
Off
Description
The port is operating at 1000 Mbps. The port LED fast flashes when the port is
sending or receiving data.
The port is operating at 10/100 Mbps. The port LED fast flashes when the port is
sending or receiving data.
No link is present on the port.
(2) Pull latch
Description
Switch ID selected.
Switch ID not selected.
Description
The blade switch has started properly.
The blade switch is performing POST, or is faulty.
The blade switch is not powered on, or is faulty.
29