Setting Terminal Parameters - HP 6125G Installation Manual

Setting terminal parameters

To configure and manage the blade switch, you must run a terminal emulator program on the console
terminal, for example, a PC. This section uses Windows XP HyperTerminal as an example.
The following are the required terminal settings:
• Bits per second—9,600
Data bits—8
•
• Parity—None
Stop bits—1
•
Flow control—None
•
• Emulation—VT100
To set terminal parameters, for example, on a Windows XP HyperTerminal:
Select Start > All Programs > Accessories > Communications > HyperTerminal.
1.
The Connection Description dialog box appears.
Enter the name of the new connection in the Name field and click OK.
2.
Figure 8 Connection description
Select the serial port to be used from the Connect using list, and click OK.
3.
8