HP 6125G Release Note page 26

|<1> 9600(Default)*
|<2> 19200
|<3> 38400
|<4> 57600
|<5> 115200
|<0> Exit
============================================================================
Enter your choice(0-5):
Enter the number that represents the baudrate you want to choose. For example, enter 5 to set the
2.
baudrate to 115200 bps.
NOTE:
The baudrate change is a one-time operation. The baudrate will restore to the default (9600 bps) at
reboot. To set up a console session with the device after a reboot, you must change the baudrate setting on
the configuration terminal back to 9600 bps.
Updating the extended BootWare segment
If the extended BootWare segment has been corrupted, enter 2 in the BASIC-BOOTWARE menu to
update it.
Enter your choice(0-5): 2
Please Start To Transfer File, Press <Ctrl+C> To Exit.
Waiting ...CCCCC
Updating the entire BootWare
To update the entire BootWare, enter 3 in the BASIC-BOOTWARE menu.
Enter your choice(0-5): 3
Please Start To Transfer File, Press <Ctrl+C> To Exit.
Waiting ...CCCCC
Running the primary extended BootWare segment
To bootstrap the system software image with the primary extended BootWare segment, enter 4 in the
BASIC-BOOTWARE menu.
Enter your choice(0-5): 4
Booting Normal Extend BootWare
The Extend BootWare is self-decompressing................................
Done!
****************************************************************************
*
*
*
****************************************************************************
Compiled Date
CPU Type
CPU L1 Cache
CPU L2 Cache
CPU Clock Speed
BootWare, Version 1.07
: Jan 6 2013
: P2020
: 32KB
: 512KB
: 1000MHz
22
|
|
|
|
|
|
*
*
*