Static Domain Name Resolution Configuration Example; Network Requirements; Configuration Procedure - HP 6125G Configuration Manual

Static domain name resolution configuration
example

Network requirements

As shown in
rather than an IP address.
Configure static domain name resolution on the device so that the device can use the domain name
host.com to access the host whose IP address is 10.1.1.2.
Figure 36 Network diagram

Configuration procedure

# Configure a mapping between host name host.com and IP address 10.1.1.2.
<Sysname> system-view
[Sysname] ip host host.com 10.1.1.2
# Use the ping host.com command to verify that the device can use static domain name resolution to
resolve domain name host.com into IP address 10.1.1.2.
[Sysname] ping host.com
PING host.com (10.1.1.2):
56 data bytes, press CTRL_C to break
Reply from 10.1.1.2: bytes=56 Sequence=1 ttl=128 time=1 ms
Reply from 10.1.1.2: bytes=56 Sequence=2 ttl=128 time=4 ms
Reply from 10.1.1.2: bytes=56 Sequence=3 ttl=128 time=3 ms
Reply from 10.1.1.2: bytes=56 Sequence=4 ttl=128 time=2 ms
Reply from 10.1.1.2: bytes=56 Sequence=5 ttl=128 time=3 ms
--- host.com ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 1/2/4 ms
Figure 36, the device wants to access the host by using an easy-to-remember domain name
65