Dhcp Relay Agent Configuration Examples; Dhcp Relay Agent Configuration Example - HP 6125G Configuration Manual

Task
Display Option 82 configuration
information on the DHCP relay
agent.
Display information about bindings
of DHCP relay agents.
Display statistics about bindings of
DHCP relay agents.
Display information about the
refreshing interval for entries of
dynamic IP-to-MAC bindings.
Display information about the
configuration of a specified DHCP
server group or all DHCP server
groups.
Display packet statistics on relay
agent.
Clear packet statistics from relay
agent.

DHCP relay agent configuration examples

DHCP relay agent configuration example

Network requirements
As shown in
is 10.1.1.1/24. Because the DHCP clients reside on a different network than the DHCP server, a DHCP
relay agent is deployed to forward messages between DHCP clients and the DHCP server.
VLAN-interface 1 on the DHCP relay agent connects to the network where DHCP clients reside. The IP
address of VLAN-interface 1 is 10.10.1.1/24 and the IP address of VLAN-interface 2 is 10.1.1.2/24.
Figure 30, DHCP clients reside on network 10.10.1.0/24. The IP address of the DHCP server
Command
display dhcp relay information { all |
interface interface-type interface-number } [ |
{ begin | exclude | include }
regular-expression ]
display dhcp relay security [ ip-address |
dynamic | static ] [ | { begin | exclude |
include } regular-expression ]
display dhcp relay security statistics [ |
{ begin | exclude | include }
regular-expression ]
display dhcp relay security tracker [ | { begin
| exclude | include } regular-expression ]
display dhcp relay server-group { group-id |
all } [ | { begin | exclude | include }
regular-expression ]
display dhcp relay statistics [ server-group
{ group-id | all } ] [ | { begin | exclude |
include } regular-expression ]
reset dhcp relay statistics [ server-group
group-id ]
43
Remarks
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in user view