Detail Status - Toshiba B-SX4T Series Specification

B-sx4t series, b-sx5t series external equipment interface specification
Hide thumbs Also See for B-SX4T Series:
Table of Contents

Advertisement

9.1.2

DETAIL STATUS

LCD Message of
Upper Line
(English)
ON LINE
HEAD OPEN
ON LINE
PAUSE
****
ON LINE
Display of error message
(See NOTE 1.)
COMMS ERROR
PAPER JAM
****
CUTTER ERROR****
NO PAPER
****
NO RIBBON
****
HEAD OPEN
****
HEAD ERROR ****
EXCESS HEAD TEMP
RIBBON ERROR****
REWIND FULL ****
ON LINE
PAUSE
ON LINE
ON LINE
ON LINE
ON LINE
SAVING #### &&&&
SAVING %%%%%%%
FLASH WRITE ERR.
FORMAT ERROR
FLASH CARD FULL
POWER FAILURE
INITIALIZING...
Printer Status
The head was closed with the head open.
The head was opened in the online mode.
Operating (Analyzing command, drawing, printing,
feeding)
In a pause state
Waiting for stripping
A command error was found in analyzing the
command.
A parity error or framing error occurred during
communication by RS-232C
A paper jam occurred during a paper feed.
An abnormal condition occurred at the cutter.
The label has run out.
The ribbon has run out.
An attempt was made to feed or issue with the
head open (except the [FEED] key)
A broken dot error has occurred in the thermal
head.
The thermal head temperature has become
excessively high.
An abnormal condition occurred in the sensor for
determining the torque for the ribbon motor.
An overflow error has occurred in the rewinder.
Ribbon near end state (Online)
Ribbon near end state (In a pause state)
Ribbon near end state (Operating)
A label issue has been completed normally.
A feed has been completed normally.
A head broken dots check has been completed
normally.
In writable character or PC command save
mode
An error has occurred in writing data into memory
for storage.
An erase error has occurred in formatting memory
for storage.
Saving failed because of the insufficient capacity of
memory for storage.
A momentary power interruption has occurred.
The memory card for storage is being initialized.
(Initialization is carried out for a max. of
approximately 15 seconds)
- 269 -
Detail Status
Auto Status
Status
Transmission
Request
Command
00
00
01
01
02
04
05
06
06
07
07
11
11
12
12
13
13
14
14
15
15
17
17
18
18
21
21
22
22
27
28
29
40
41
00
55
50
50
51
51
54
54

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents