Maximum Number Of Digits; Connection Setting - Toshiba B-SX4T Series Specification

Maximum number of digits

The maximum number of digits varies according to the ECC type or format ID.
Since each Kanji character uses 2 bytes, the maximum number of digits for it
becomes half of the following values.
ECC0
Format ID 1 500
Format ID 2 452
Format ID 3 394
Format ID 4 413
Format ID 5 310
Format ID 6 271
ECC200
For the maximum number of digits in cell units, see the next page.

Connection setting

The connection setting is used to comprise data with a set of two-dimensional codes
when the data cannot be expressed with a two-dimensional code. When three two-
dimensional codes are used to comprise data, identification information of 1/3, 2/3,
and 3/3 is inserted into each two-dimensional code. The ID number is programmed
to include a proper combination of two-dimensional codes when one label contains
plural connecting symbols.
containing identification information for 1/2 and 2/2 in the same label, combination of
two-dimensional codes is unclear. By adding the ID number, the combination is
made clearer.
ECC50 ECC80
457 402
333 293
291 256
305 268
228 201
200 176
Numeric Alphanumeric
2000
For example, when there are two kinds of data
- 130 -
ECC100
300
218
190
200
150
131
8 bit
2000 1556
ECC140
144
105
91
96
72
63