Status Request/Response Command - Toshiba B-SX600 Series Command Manual

8. STATUS REQUEST/RESPONSE COMMAND

Format
● Request command
Byte/bit 7 6
0
Header
1
2
Command identifier
3
● Response command
Byte/bit 7 6
0
SMONID
to
3
4
to DOCID
7
8
Header
9
10
Command identifier
11
12
Error
13
14
End of print
15
Function
Sends the printer status and print job status to the host.
Explanation
• Errors and print job statuses to be detected by the printer are as follows:
th th
• When 8
to 11 bytes (counted from "0") read from the printer are "/RES", this is judged as a response
to the request.
Error code
0 Normal
1 Paper jam
2 Paper end
3 Ribbon end
4 Print head is overheating.
5 Side cover is opened.
6 Print head unit is opened.
7 Calibration failed.
8 Print head broken element is detected.
5 4 3 2
5 4 3 2
Meaning
1 0
'/'
'T'
'E'
'S'
1 0
Refer to /TJI.
Refer to /TJI.
'/'
'R'
'E'
'S'
Equivalent to the return value
"get_pe_errno"
Equivalent to the return value
"chk_print_completed"
- 16 -
B-SX600 Command Manual
Remarks
Remarks