Tablet Pc Pen; Reserve Pen; External Monitor - Toshiba Satellite R20 User Manual

Tablet PC Pen

Use it as a spare to your computer. Spare pen tip and draw-out tool are
included. Refer to Chapter 4,

Reserve Pen

Supplied pen uses a pen instead of Supplied pen at the time of loss or
breakage. Refer to Chapter 4,

External monitor

An external analog monitor can be connected to the external monitor port
on the computer. To connect a monitor, follow the steps below.
1. Turn the computer's power off.
2. Connect the monitor cable to the external monitor port and tighten the
screws on the left and right hand side.
3. Turn the monitor's power on.
4. Turn the computer's power on.
When you turn on the power, the computer automatically recognizes the
monitor and determines whether it is color or monochrome.
However, the Windows Desktop appears on a display device that you used
last time to shut down your computer, if the display device exists when you
turn on the power.
To change the display settings, press Fn + F5. If you disconnect the
external monitor before you turn the computer's power off, be sure to press
Fn + F5 to switch to the internal display. Refer to Chapter 5,
for details on using hot keys to change the display setting.
User's Manual
Figure 3-19 Connecting the monitor cable to the external monitor port
Features, Utilities and Options
Operating Basics, for the detailed usage.
Operating Basics, for the detailed usage.
External monitor
port
Monitor cable
The Keyboard,
3-31