Toshiba Satellite R20 User Manual page 163

■
Do not remove the battery pack while the computer is in Standby
Mode. Data is stored in RAM, so if the computer loses power it will be
lost.
■
In Hibernation Mode, data will be lost if you remove the battery pack or
disconnect the AC adaptor before the save is completed. Wait for the
HDD indicator to go out.
■
Do not touch the battery release latch while holding the computer or the
battery pack might fall out due to the unintentional release of the
battery release latch and cause injuries.
1. Save your work.
2. Turn the computer's power off. Make sure the Power indicator is off.
3. Remove all cables connected to the computer.
4. Close the LCD display panel and turn the computer upside down.
5. Slide the battery safety lock towards the release (
the battery release latch movable.
Battery lock
Battery
release latch
6. Slide the battery release latch (1) to free the battery pack for removal
(2), then slide out the battery pack.
User's Manual
Figure 6-1 Releasing the battery pack (1)
Figure 6-2 Releasing the battery pack (2)
Power and Power-Up Modes
) position to make
Battery pack
Battery pack
Battery
release latch
6-12