Toshiba Satellite R20 User Manual page 173

HDD Priority Options
If more than one HDD is installed in the computer, this option lets you set
the priority for HDD detection. If the first detected HDD has a boot
command, the system will boot from the HDD.
Built-in HDD ->
USB (Default)
USB -> Built-in
HDD
■
If a boot command is not found on the first detected HDD, the system
will not boot from the other HDD. It will search the next device in the
boot priority for a boot command.
■
Some modules may not be displayed.
Network Boot Protocol
This feature sets the protocol to remotely boot from the network.
Network Boot Protocol is not displayed for Gigabit Ethernet LAN.
USB Memory BIOS Support Type
Set the type of the USB memory as a startup device.
HDD
FDD
Keyboard
Wake-up on Keyboard
When this feature is enabled and the computer is in Standby Mode, you
can turn on the computer by pressing any key. It is effective only for the
internal keyboard and only when the computer is in Standby Mode.
Enabled
Disabled
User's Manual
The priority is set as Built-in HDD -> USB.
The priority is set as USB -> Built-in HDD.
[PXE] Sets PXE as the protocol (Default).
[RPL] Sets RPL as the protocol.
Set the type of the USB memory to be equivalent
to the HDD (Default).
* Based on the [HDD] order in the [Boot Priority
Options] item. The order with respect to the other
HDD can be set in the [HDD Priority Options]
item.
Set the type of the USB memory to be equivalent
to the FDD.
* Based on the [FDD] order in the [Boot Priority
Options] item.
Enables the Wake-up on Keyboard function.
Disables the Wake-up on Keyboard function (Default).
HW Setup & BIOS Setup
7-5