Toshiba Hdd Protection Properties; Hdd Protection - Toshiba TECRA S4 User Manual

Operating Basics

TOSHIBA HDD Protection Properties

You can change the settings associated with this feature by using the
TOSHIBA HDD Protection Properties window, this can be opened by
clicking start followed by All Programs followed by TOSHIBA followed by
Utilities and then clicking HDD Protection setting. In addition, this
window can also be started from the icon on the Windows Task Bar or from
within the Control Panel.
TOSHIBA HDD Protection Properties

HDD Protection

This section allows you to configure whether the TOSHIBA Hard Disk Drive
Protection function is enabled or disabled.
Detection Level
This function can be set to one of four levels (OFF, 1, 2 and 3) depending
on the environment in which the computer is being used.
The Level 3 setting is recommended to provide a higher level of protection
but, if the computer is used in a mobile or other unstable environment, this
may result in frequent execution of the TOSHIBA Hard Disk Drive
Protection feature which will slow down the drive in terms of reading and
writing. In view of this you should configure a lower detection level when
the speed of the hard disk drive's reading/writing is a priority.
User's Manual 4-39