Toshiba TECRA S4 User Manual page 100

Operating Basics
In addition, this utility allows for different detection levels to be set
depending on whether the computer is used as a mobile device, or whether
it is used in a stable environment such as on a desk in the workplace or at
home. This is achieved by allowing different detection levels to be set
depending on whether the computer is running on battery power (mobile) or
AC power (desktop) - with these settings configured, the detection level will
automatically switch according to the power connection mode in use.
Details
To open the Details window, click the Setup Detail button in the TOSHIBA
Hard Disk Drive Protection Properties window.
Detection Level Amplification
These settings allow the hard disk drive protection feature to be configured
such that when the AC adaptor is disconnected or the LCD display panel is
closed, its assumes that the computer is about to be moved and sets the
detection level to its maximum level for a period of ten seconds.
HDD Protection Message
This option specify whether a message will be displayed when the Hard
Disk Drive Protection function is active.
■
Please note that this function does not work when the computer is
starting, is in Standby Mode or Hibernation Mode, is transitioning into
Hibernation Mode, is returning from Hibernation Mode or is powered
off. In all of these scenarios take care to ensure that you do not subject
the computer to any form of vibration, shock or impact.
■
This function is only supported within Windows
4-40
Details
®
XP.
User's Manual