Power-Up Modes; Panel Power On/Off; System Auto Off - Toshiba TECRA S4 User Manual

Power and Power-Up Modes
If you enter the password incorrectly three times in a row, the computer
shuts off. In this case, you must turn the computer back on to retry
password entry.

Power-up modes

The computer has the following power-up modes:
■
Boot: Computer shuts down without saving data. Always save your
work before you turn the computer off in boot mode.
■
Hibernation: Data in memory is saved to the hard disk drive.
■
Standby: Data is maintained in the computer's memory.
Refer also to the sections
in Chapter 3,
Windows utilities
You can configure various settings associated with both Standby Mode and
Hibernation Mode within TOSHIBA Power Saver.
Hot keys
You can use hot keys Fn + F3 to enter Standby Mode and Fn + F4 to enter
Hibernation. Refer to Chapter 5,

Panel power on/off

You can set up your computer so that power turns off automatically when
you close the display panel. When you open the panel, power will be turned
on in Standby Mode or Hibernation Mode but not in boot mode.
If the panel power off function is enabled and you manually shut down
Windows, do not close the computer's LCD display panel until the shut
down process has been completed.

System Auto Off

This feature turns the system off automatically if it is not used for a set
duration. The system shuts down in Standby Mode or Hibernation Mode in
Windows.
6-16
Turning on the power
Getting Started.
and
The Keyboard, for details.
Turning off the power
User's Manual