Entering Stopovers; Clearing A Selected Destination - HP 348773-001 User Manual

Entering Stopovers

A stopover is an intermediate location on your route. This feature guides you to the intermediate
location and then continues to the destination.
To enter a stopover:
1. Tap the Stopover Button on the Destination Options screen.
The Set Stopover screen displays.
You can also tap on the map location and tap Set Stopover from the pop up menu.
2. Tap on a Stopover Category.
3. Enter the Stopover information.
Refer to the Entering a Destination section for the steps to enter information for a specific
category.

Clearing a Selected Destination

To cancel a selected destination, do one of the following:
1. Tap on the Menu button > Destinations option.
2. Tap on the Clear Dest button on the Destination Options screen.
The screen displays in Map View mode.
User's Guide
Managing the Destination and Route
Entering Stopovers
4-22