Fup Custom File Example; Interrupting Or Terminating A Fup Process; Entering A Fup Command - HP T6553 D45 Reference Manual

FUP Overview

By default, FUP does not echo the commands for either file. To start echoing,
specify CONFIGURE ECHO OBEY in either file.

If there are no existing custom files when FUP begins, default custom files are
automatically created for your security.

Custom files must be EDIT files.

Errors encountered during the processing of a custom file could cause the FUP
session to terminate.

FUP Custom File Example

To save the current CONFIGURE options to a file that can be executed with FUP
OBEY or as a FUPCSTM file:
-SHOW /OUT FUPCSTM/ CONFIGURE AS COMMANDS

Interrupting or Terminating a FUP Process

To terminate a FUP process after it has started, use CTRL-Y.
To interrupt a FUP process, press the BREAK key.
User Entry
CTRL-Y
BREAK

Entering a FUP Command

For descriptions of the syntax for each FUP command, see
Commands. The basic command structure (including run options) is:
FUP [ / run-options / ] [ command ]
Results
Terminates a FUP process from the FUP prompt or a PURGE command from
the PURGE prompt, and stops the execution of COPY and LOAD commands
during input from the terminal.
Aborts any FUP commands that generate listings (including the FILES, INFO,
SUBVOLS, and COPY commands), and the PURGE command prompts.
Three responses are possible:

FUP prompt—FUP recognized the break and terminated the command.

TACL prompt—TACL recognized the break, but FUP continues in the
background.

Nothing or a delay—FUP cannot break when BREAK is pressed. FUP
should recognize the BREAK after a brief period. If FUP does not stop,
use the TACL STOP command from another TACL session.
Pressing the BREAK key while the FUP prompt is displayed or while FUP is executing a
nonlisting command, returns control of the terminal to TACL—but the FUP process continues.
File Utility Program (FUP) Reference Manual—523323-014
1-5
FUP Custom File Example
Section 2, FUP