Setting Up The Bluetooth Gps Receiver - HP 348773-001 User Manual

Setting Up the Bluetooth GPS Receiver

The Navigation System requires set up with the Bluetooth GPS receiver in order to operate. For the
initial set up, do the following:
1. Charge the Bluetooth GPS receiver using the DC adapter (included) or the AC adapter for the
HP iPAQ PocketPC.
The first time you charge the Bluetooth GPS receiver, it can take up to three
hours.
2. Turn on the Bluetooth GPS receiver using the Power switch on the left side of the receiver.
The blue LED flashes when the receiver is turned on.
3. Partner the Bluetooth GPS receiver with the iPAQ PocketPC, as follows:
n Tap Start at the top of the Today screen of the iPAQ PocketPC.
n Tap Programs on the Start menu
4. Tap the iPAQ Navigation System icon on the Programs screen.
This is a one time procedure. After this, you just tap the Navigation Sys-
tem icon at the top of the Start menu.
The following warning displays:
5. Tap on the I Accept button.
User's Guide
Setting Up the Bluetooth GPS Receiver
.
2-2