HD Camera Kit Setup
Power Supply
System Select
In order for the Sony EVI-HD1 Camera to Sync with your
VidyoRoom HD-200, you need to set the System Select
POT screw on the rear of the camera to #2.
Connect Power Supply to power input.
Connect VISCA cable to VISCA In.
Connect HD-SDI BnC Coax cable to HD OUT.
Audio Connection Using Yamaha PJP-25UR
TM
11
Initial VidyoRoom Setup for HD-200
BnC Coax HD-SDI
VISCA Serial Cable
DC IN 5V
OUT
AUDIO
IN