Initial Vidyoroom Setup For Hd-200 - Vidyo VidyoRoom HD-220 User Manual

Front
1.
Power
Back
Connecting your VidyoRoom for your HD-200 System
7.
VGA2USB (optional)
6.
yamaha PJP-25UR
(optionaL)
4.
5. 2.
Camera
VISCA
1. Connect Power cable.
2. Connect Ethernet cable to ETH-1 and to your network.
3. Connect to TV using DVI to HDMI cable on TV-1. A second screen can be
connected to TV-2.
4. Connect HD Camera using BnC Coax HD-SDI cable to CAMERA.
(See illustration on page 9.)
5. Connect VISCA cable to camera VISCA port and to SERIAL
(if applicable).
6. Connect yamaha PJP-25UR to available USB port.
7. Connect VGA2USB (optional) to available USB port.
10

Initial VidyoRoom Setup for HD-200

Initial VidyoRoom Setup for HD-200
3.
Primary Display
3.
Secondary Display
Ethernet
TM