Rear Wheel - Yamaha TT-R50E Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
7. While applying the front brake,
push down hard on the handlebar
several times to check for proper
fork operation.
8. Install each front fork leg guard by
installing the bolts.
6

Rear wheel

To remove the rear wheel
WARNING
G It is advisable to have a Yamaha
dealer service the wheel.
G
Securely support the motor-
cycle so that there is no danger
of it falling over.
1. Loosen the axle nut.
4
3
2
1
1. Axle nut
2. Washer
3. Drive chain slack adjusting nut
4. Locknut
6-27
EAU25080 2. Remove the brake pedal free play
adjusting nut, and then disconnect
the brake rod from the brake cam-
EAU39770
shaft lever.
EWA10820
1
3
1. Brake pedal free play adjusting nut
2. Brake rod
3. Brake camshaft lever
3. Loosen the locknut and drive chain
adjusting nut on each end of the
swingarm.
4. Lift the rear wheel off the ground
according to the procedure on
page 6-25.
5. Remove the axle nut and washer,
then pull the wheel axle out.
2