ITEM
Brake pedal
Brake lever
Sidestand
Chassis fasteners
Engine stop switch
• Make sure that operation is smooth.
• Lubricate pedal pivoting point if necessary.
• Make sure that operation is smooth.
• Lubricate lever pivoting point if necessary.
• Make sure that operation is smooth.
• Lubricate pivot if necessary.
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
• Check operation.
PRE-OPERATION CHECKS
CHECKS
4-3
PAGE
6-19
6-20
6-20
—
3-1
4