Song Playback Related Parameters (Repeat Settings, Channel Settings, Guide Function) - Yamaha Tyros5 Reference Manual

Song Playback Related Parameters (Repeat Settings, Channel Settings,
Guide Function)
The instrument has a variety of Song playback functions—repeat playback, various guide settings, etc.—which can be
accessed in the display below.
1
Call up the operation display.
[FUNCTION]  [B] SONG SETTING
[A]/[B] GUIDE MODE
[1 ]
GUIDE ON/OFF
[G] REPEAT MODE
[H] REPEAT FOLDER
[I] PHRASE MARK
REPEAT
NEXT PAGE
See page 56.
Determines the method of repeat playback.
OFF: Plays through the selected Song, then stops.
SINGLE: Plays through the selected Song repeatedly.
ALL: Continues playback through all the Songs in the specified folder repeatedly.
RANDOM: Continues playback at random through all the Songs in the specified
folder repeatedly.
Determines the directory in which the contained Songs are played in sequence when
REPEAT MODE is set to "ALL" or "RANDOM." Here, the directory refers to the
path memorized to each of the SONG [I]–[IV] buttons.
CURRENT: Sequentially plays all Songs in the directory containing the currently
selected Song, starting with the currently selected Song.
ALL: Sequentially plays all Songs in all directories (memorized to the SONG [I]–
[IV] buttons). Playback starts with the currently selected Song, then the remainder
of the Songs in the current directory, followed by the Songs in the other directo-
ries.
This parameter is available only when the current Song contains Phrase Marks, which
specify certain locations (of several measures each) in the Song. When this is set to
ON, the section corresponding to the Phrase Mark (specified via the SONG [G]
(REW) and [H] (FF) buttons) is played back repeatedly. Note that this parameter
can be set only when Song playback is stopped.
Tyros5 Reference Manual
4
55