Yamaha Tyros5 Reference Manual page 32

 Basic Procedure for creating a Style
1
Select the desired Style for the starting data.
2
Press the [CREATOR] button, then the [B] (STYLE CREATOR) button to call up the Style
Creator display.
3
From the BASIC page, select a Section, then make other settings as necessary.
• Select a Section to be edited or recorded. If the REC CHANNEL indication is shown in the lower half section of
the display, press the [EXIT] button, press the [A] to select "1 SECTION," then use the [3 ]–[4 ] but-
tons to select a Section.
• If you want to create a Style entirely from scratch, press the [C] (NEW STYLE) button to call up an empty new
Style.
• For the current Section, select the pattern length via the [5 ]–[6 ] buttons. After selecting, press the [D]
(EXECUTE) button to actually enter the specified length.
Note that if an Audio Style is selected as starting data, changing the pattern length deletes the corresponding
Audio part.
• For the entire current Style, set the Tempo and Time Signature in the display called up via the [B] button.
4
Create the Source Pattern for each channel.
• Realtime Recording on the BASIC page
Lets you record the Style by simply playing the keyboard.
• Step Recording on the EDIT page
Lets you enter each note individually.
• Style Assembly on the ASSEMBLY page
Lets you copy various patterns from other preset Styles or Styles you have already created.
5
Edit the already recorded channel data.
• Editing the channel data on the GROOVE
Lets you change the rhythmic feel, quantizing and velocity, etc.
• Editing the SFF parameters on the PARAMETER page
Lets you copy various patterns from another preset Styles or Styles you have already created.
6
Repeat steps 3–5 as desired.
7
Press the [I] (SAVE) button to save the created Style.
For details, refer to "Basic Operations" in the Owner's Manual.
32 Tyros5 Reference Manual
(page 33)
(page 37)
(page 37)
(page 39), CHANNEL
(page
(page 41), and EDIT (page
42)
37) pages